Compression Aluminum Repair Sleeve for Conductor
Product Description
Compression Aluminum Repair Sleeve for Conductor
Splicing and repair sleeve are mainly used in continue and repair of the overhead power line cable and Ground wire. There are compress type, bolt and preliminary ground type according to the structural type and installation difference, the compress type with hydraulic pressure, clamp pressure and detonation pressure.
Compress type splicing fittings bear all the tension continue of the wire and ground wire, bolt type parallel groove clamp not. As electrical conductor, the resistance of the splicing fittings electric should not bigger than the resistance of being spliced conductor with same length. Under the rated voltage, the splicing point temperature should not higher than the conductor temperature when through the max load electric current for long time.
Catalog No. | Suitable Conductor | Dimensions(mm) | Weight | ||
D | L | R | |||
JX-70/40 | LGJF-70/40 LGJ-70/40 | 26 | 200 | 7.5 | 0.2 |
JX-90/40 | LGJ-90/40 | 30 | 150 | 8.0 | 0.3 |
JX-95/55 | LGJ-95/55 | 32 | 150 | 9.0 | 0.3 |
JX-95/140 | LGJ-95/140 | 32 | 200 | 11.0 | 0.7 |
JX-150/25 | LGJ-150/25 | 30 | 150 | 9.5 | 0.3 |
JX-150/35 | LGJ-150/35 | 30 | 150 | 9.5 | 0.2 |
JX-185 | LGJ-185/25 185/30 185/45 210/10 | 32 | 150 | 10.5 | 0.2 |
JX-185/10 | LGJ-185/10 | 32 | 150 | 10.0 | 0.2 |
JX-210 | LGJ-210/25 210/35 | 34 | 200 | 11.0 | 0.3 |
JX-240 | LGJ-240/30 240/40 210/50 | 36 | 200 | 11.5 | 0.4 |
JX-300 | LGJ-300/20 300/25 300/40 300/50 | 40 | 250 | 13.0 | 0.6 |
JX-300/15 | LGJ-300/15 | 40 | 250 | 12.5 | 0.6 |
JX-400 | LGJ-400/20 400/25 400/35 | 45 | 300 | 14.5 | 0.8 |
JX-400/50 | LGJ-400/50 | 45 | 320 | 14.5 | 0.9 |
JX-500 | LGJ-500/35 500/45 500/65 | 52 | 320 | 16.0 | 1.1 |
JX-630 | LGJ-630/45 630/55 630/80 | 60 | 370 | 18.0 | 1.7 |
JX-800 | LGJ-800/70 800/100 | 65 | 370 | 20.5 | 1.9 |
JX-800/55 | LGJ-800/55 | 65 | 370 | 20.0 | 1.9 |
JX-70BG | JLB23-70 | 22 | 190 | 5.8 | 0.2 |
JX-80BG | LB20J-800 | 24 | 200 | 6.4 | 0.2 |
JX-90BG-27 | 26 | 160 | 6.6 | 0.2 |
our factory
Jiangsu Chuandu Electrical Technology Co.,ltd is specialized in Electric Power fitting for 18 years.The company was founded in 1999 with the registered capital reaching RMB 100 million, covers an area of 41000 ㎡.The company is a technology-based manufacturing-type enterprise which mainly produces and sells electrical fittings of various specifications and types for high and low voltage transmission and power stations. Our products covering: Suspension Clamp; Strain Clamp; Link fitting; Protective Fitting; Preformed Fitting; Splicing Fitting; Cable Terminal, etc.
Manufacturing Workshop
Product Categories : Line Fitting > Splicing Fitting